Walpersdorfer Str. 38 91126 Schwabach Tel.: +49 (0)9122 - 63148-0 Fax.: +49 (0)9122 - 63148-29
Homepage-Sicherheit
SFU 0200/1
All around solution for all applications with low voltage spindles Highest efficiency and 28,5 kHz PWM while spindle drive minimize power losses in the spindle Powerful spindle drive with high output power reserves High safety because of galvanically separation of spindle lines from mains network For all temperature sensors: PTC, KTY and PT1000
SSE
SFU 0200/1 SSE Manual Supply connection Fuse 230V:                                                      115V: 2,5AT                                                                                                   4,0AT Continuous  output power Output voltage Continuous phase current Peak phase current Over current Output frequency Motor connection                                                                                                                                                                                                                Desktop:                                                                                                                                                                                                                                       circular jack:                                                3-pin or 7-pin                                                              pluggable screw  terminals:                                           2,5mm² 6-pin SSE:                                screw terminals 4mm²                  8-pin: U,V, W, PE, PTC,  FP, SGND Spindle  characteristics: Spindle sensor inputs Control inputs 1 Analog:                                                                 0-10V 3 Digital:  0-24V Control outputs 1 Analog:                                                                          0-10V 2 Digital:                 relay outputs,      24VDC/1000mA,                                     125VAC/500mA Interface max. dimensions                                   W x H x D (mm)                                     Desktop:                                                                                   SSE:                                                                                   243 x 94 x 268                                                             90 x 312 x 268                                                                                  Weight Desktop:                                                                                   SSE:                                                                                   ca. 6,0 kg ca. 6,2kg Protection Operating conditions max. 16, stored internally 230V, 50Hz / 115V, 60Hz                                                             switchable with rotary switch and  with exchange of fuse TECHNICAL DATA 300 VA / S1-100% max. 36V 6,5A 7,5A to be set up for max. 20s AC: 4.000Hz  /  240.000 rpm                                                     DC: 1.667Hz  /  100.000 rpm                                                                                     speed sensor, PTC, KTY, PT1000 5 - 40°C /  rel. humidity of air max. 85% RS232 IP20 Accessories Profibus Profinet etc… SFU-Communicator:
back
SFU 0200/1
Manual Supply connection Fuse 230V:                                                      115V: 2,5AT                                                                                                   4,0AT Continuous  output power Output voltage Continuous phase current Peak phase current Over current Output frequency Motor connection                                                                                                                                                                                                                Desktop:                                                                                                                                                                                                                                       circular jack:                                                3-pin or 7-pin                                                              pluggable screw  terminals:                                           2,5mm² 6-pin SSE:                                 screw terminals 4mm²                  8-pin: U,V, W, PE, PTC,  FP, SGND Spindle  characteristics: Spindle sensor inputs Control inputs 1 Analog:                                                                 0-10V 3 Digital:  0-24V Control outputs 1 Analog:                                                                          0-10V 2 Digital:                 relay outputs,      24VDC/1000mA,                                     125VAC/500mA Interface max. dimensions                                   W x H x D (mm)                                     Desktop:                                                                                   SSE:                                                                                   243 x 94 x 268                                                             90 x 312 x 268                                                                                  Weight Desktop:                                                                                   SSE:                                                                                   ca. 6,0 kg ca. 6,2kg Protection Operating conditions max. 16, stored internally 230V, 50Hz / 115V, 60Hz                                                             switchable with rotary switch and  with exchange of fuse TECHNICAL DATA 300 VA / S1-100% max. 36V 6,5A 7,5A to be set up for max. 20s AC: 4.000Hz  /  240.000 rpm                                                     DC: 1.667Hz  /  100.000 rpm                                                                                     speed sensor, PTC, KTY, PT1000 5 - 40°C /  rel. humidity of air max. 85% RS232 IP20